• welded wire mesh 100x100mm
  • Xane
  • Installation and Usage

تشرینی دووەم . 06, 2024 11:25 Vegere navnîşê

Installation and Usage

Barbed wire, as an effective safety protection and fence material, requires attention to the following matters during installation, maintenance, and use to ensure its stability and safety.

 

Barbed Wire Installation Precautions         

 

Choose appropriate support structure: When installing têlên barbar, choose appropriate fence posts or other support structures and ensure their stability and reliability. The spacing and height of the supporting structure should be adjusted according to actual needs to ensure the tightness and protective effect of the têlên barbar.

 

Maintain a taut state: During installation, ensure that the têlên barbar is tightened to avoid any looseness or sagging. This can be achieved by using fasteners or tensioning devices to ensure its stability and protective performance.

 

Pay attention to the installation sequence: When installing têlên barbar, follow the prescribed sequence, first install the supporting structure, and then fix and tighten the wire mesh. At the same time, care should be taken not to damage the spikes or main wires of the têlên barbar to avoid affecting its protective effect.

 

Compliance with safety regulations: During installation, relevant safety regulations and operating instructions should be followed, and appropriate protective equipment such as gloves, goggles, etc. should be worn to prevent being scratched or stabbed by têlên barbar.

 

Barbed Wire Maintenance Precautions     

 

Regular inspection: Barbed wires should be inspected regularly, including checking their integrity, firmness, and tension. If any damage or looseness is found, it should be repaired or replaced in a timely manner.

 

Cleaning up debris: The têlên barbar  should be regularly cleaned of debris and dirt, such as leaves, dust, etc., to maintain its cleanliness and appearance. At the same time, care should be taken not to use sharp tools or objects for cleaning to avoid damaging the têlên barbar.

 

Anti corrosion treatment: For têlên barbar exposed to outdoor environments for a long time, regular anti-corrosion treatment such as galvanizing, painting, etc. should be carried out to extend their service life and maintain their protective performance.

 

Precautions for Using Barbed Wire        

 

Understanding local regulations: When using têlên barbar, it is important to be aware of local laws, regulations, and rules to ensure legality and compliance. Especially when using têlên barbar in private territory or public places, approval or permission from relevant departments is required.

 

Pay attention to warning signs: Clear warning signs and prompts should be placed around the Barbed wire to remind people to pay attention to safety and avoid touching or crossing.

 

Avoid illegal use: Barbed wire should be avoided from being used for illegal or malicious purposes, such as setting traps, harming others, etc. This is not only illegal, but also has a negative impact on society.

 

In summary, the installation, maintenance, and use of têlên barbar require strict adherence to relevant regulations and precautions to ensure its stability and safety.

Wekî pargîdaniyek taybetî ya di tevna têl a hardware de, qada karsaziya me pir berfireh e. Me heye têlên barbar, roll tevna wire, têla pola ya hişk xêzkirî, tevna bihêzker, bar çargoşe zivirî , cold drawn flat steel , galvanized steel fence , black annealed iron wire , PVC coated wire , hexagonal wire mesh , galvanized wire , chain link fence û weld wire mesh . Ew bihayê têlên barbed di şirketa me de maqûl in. Heke hûn di hilberê me de balkêş in, hûn bi xêr hatin ku bi me re têkilî daynin!

Par

Heke hûn bi hilberên me re eleqedar in, hûn dikarin hilbijêrin ku agahdariya xwe li vir bihêlin, û em ê di demek nêzîk de bi we re têkilî daynin.


ckbKurdish